Trilubgrease BENT MS 490-550
Trilubgrease BENT MS 490-550 is a mineral based bentonite grease with MoS2 and Graphite additives, which is developed for high temperatures.
It shows long life performance between operating temperatures between –20 and 180°C and under heavy loads.
APPLICATION PLACES
- Lubrication of ladle crane wire ropes.
NOTE: NOT mixable with Sodium, Calcium and Barium greases !
BENEFITS
- High performance even at high temperatures and under heavy loads owing to the MoS2 and Graphite additives
- Absorbs vibrant and impact loads, decreases friction and wear.
- Protects the wire ropes under wet, muddy and heavy conitions.
- Very good protection against corrosion and rust through antioxidant and anticorrosion additives.
- With its fluidity, it can be easily applied on to the wire ropes.
PACKAGES : 16 Kg, 180 Kg
PROPERTIES
| Trilubgrease BENT MS | Standart | 490-550 |
| NLGI | DIN 51818 | 0 |
| Color | Black | |
| Base Oil | Mineral | |
| Soap Type | Bentonite | |
| Worked penetration 60 ST, 25 °C | ASTM D 217 | 355 - 385 |
| Density 20 °C , g/cm3 | DIN 51757 | ~ 0,93 |
| Base Oil viscosity, 40 °C mm2/sec | ISO VG | 495 - 605 |
| MoS2 amount [ % Weight ] | 2 % | |
| Dropping Point, [°C] | DIN ISO 2176 | > 270 |
| Oil seperation amount [ % Weight ] 40 °C , 42 h | IP 121 | -- |
| Copper Corrosion, 24 h/100 °C | DIN 51811 | Max. 1 b |
(*) given values are typical and may vary in production.
Warning: The explanations and technical values in this document are general data which are obtained by research and experience. Our company do not accept any responsibility in case of any damage caused by wrong application of lubricants or wrong lubricant choice. Please consult technical experts for the right choice of lubricant and application.
