Trilubgrease LBX–EP 68 - 915-380
Trilubgrease LBX-EP 68-915-380, is a special complex high EP, mineral based lithium grease for heavy duty high performance grease.
Trilubgrease LBX-EP 68-915-380 shows high performance even under shock, variable vibration loads with water between operating temperatures –20°C and 140°C.
APPLICATION PLACES
- Steel mills; shock, variable vibration loads with water and water vapor, mid- and high speed bearings and journal bearings.
- Automotive, paper, mining, cement, agricultural machinery, construction equipment
- Fan and electric motor bearings
- Generators
- Heavy duty moving band conveyor beds
- Crane mechanism
NOTE: NOT mixable with sodium, lithium complex and barium greases!
BENEFITS
- Thanks to high EP additives, shows high performance even under heavy loads and high temperature.
- Damps vibration and shock load, decreases friction and wear.
- The special complex protects the bearings under heavy conditions, water, water vapor and mud. Also provides leak proof.
- Excellent protection from corrosion and oxidation.
- Owing to very good metal adhesion, the grease will not be driven away from the bearing for a long period.
- Owing to its NLGI stability it can be used in central lubrication systems without any problem.
PACKAGES : 16 Kg, 180 Kg
PROPERTIES
| Trilubgrease LBX-EP | Standart | 68–915-380 |
| NLGI | DIN 51818 | 1,5 |
| Color | Yellow Brown | |
| Base Oil | Mineral | |
| Soap Type |
Special
Litium Complex
|
|
| Worked penetration 60 ST, 25 °C | ASTM D 217 | 295 - 315 |
| İWorked penetration 100.000 ST, 25 °C | ASTM D 217 | 300 - 320 |
| Density 20 °C , g/cm3 | DIN 51757 | ~ 0,91 |
| Base Oil viscosity, 40 °C mm2/sec | ISO VG | 380 |
| Soap Amount [ % Weight ] | 22 - 25 | |
| Dropping point, [°C] | DIN ISO 2176 | > 203 |
|
Oil seperation amount [ % Weight ] 40 °C , 42 h
|
ASTM D 1742 | 1 Max. |
|
Oil seperation amount [ % Weight ] , 150 °C, 30 h
|
FTMS 791 C | 8,5 Max. |
| Copper Corrosion, 24 h/100 °C | DIN 51811 | 1 a |
| Shell 4 ball test , Weld load (kg) | ASTM D 2596 | > 500 |
| Shell 4 ball test. Wear – Scar diameter (mm) 1800 rpm, 60kg, 60 sec, 25 °C | IP 239 | 0,538 |
| Speed factor ( nxdm ) | d+D/2 x n | 400.000 |
(*) given values are typical and may vary in production.
Warning: The explanations and technical values in this document are general data which are obtained by research and experience. Our company do not accept any responsibility in case of any damage caused by wrong application of lubricants or wrong lubricant choice. Please consult technical experts for the right choice of lubricant and application.
