Trilubgrease LX–WEP 692
Trilubgrease LX-WEP 692 is a high performance grease strengthened with Organic EP additive, produced by mineral base oil, Lithium- Lithium complex soap for heavy duty and high temperature applications.
Trilubgrease LX-WEP 692 shows high performance even under shock, variable vibration loads with water between the operating temperatures –20 and 250 °C. It’s greasing period is longer than the other ordinary Lithium-Lithium complex soap greases.
APPLICATION PLACES
- Knitting machinery gears,
- Middle and high rpm bearings working under vibration, shock load and high temperature iron-steel industry.
- Automotive, paper, mining, cement, agricultural machinery, construction equipments.
- Fan and electric motor bearings.
- Generators.
- Conveyor beds with moving bands working under heavy conditions
- Crane mechanisms,
- Taret lubrication,
- Suitable for marine application
BENEFITS
- High performance under high temperature and heavy loads with it’s Organic EP additive and dry lubricating property.
- Damps shock and vibration load, decreases friction and wear.
- Protection for bearings under heavy conditions, water, and mud. Also provides leak proof.
- Excellent protection from corrosion and oxidation.
- By increasing service life of bearings it decreases maintenance costs.
- Due to its NLGI stability Trilubgrease LX-WEP 69x2can be used in central lubrication system without any problem.
PACKAGES : 16 Kg, 180 Kg
PROPERTIES
| Trilubgrease LX-WEP | Standart | 692 |
| NLGI | DIN 51818 | 2 |
| Color | White, Cream | |
| Base Oil | Mineral | |
| Soap Type | Lithium Complex | |
| EP | Powder | |
| Worked penetration 60 ST, 25 °C | ASTM D 217 | 265 – 295 |
| Density 20 °C , g/cm3 | DIN 51757 | ~0,92 |
| Base Oil viscosity, 40 °C mm2/sec | ISO VG (cSt) | 550 |
| Soap Amount [ % Weight ] | 13 - 17 | |
| Dropping point, [°C] | DIN ISO 2176 | > 300 |
| Oil seperation amount [ % Weight ], 40 °C , 42 h | IP 121 | < %1 |
| Copper Corrosion, 24 h/100 °C | DIN 51811 | Max. 1 b |
| Timken OK Load (lbs) | ASTM D2509-68 | 12 |
| Shell 4 ball test , Weld load (kg) | ASTM D 2596 | > 500 |
| Shell 4 ball test. Wear – Scar diameter (mm) 1800 rpm, 60kg, 60 sec, 25 °C. | IP 239 | < 0,5 |
| Operating Temperature [°C] | -20…250 | |
| Speed factor ( nxdm ) | d+D/2 x n | 300.000 |
(*) given values are typical and may vary in production.
Warning: The explanations and technical values in this document are general data which are obtained by research and experience. Our company do not accept any responsibility in case of any damage caused by wrong application of lubricants or wrong lubricant choice. Please consult technical experts for the right choice of lubricant and application.
