Trilubgrease MPC–EP 692-460
Trilubgrease MPC- EP 692-460 range is a multipurpose grease containing EP additive, mineral base oil, and Lithium soap. This range is enhanced by Aliminum Stearat group and resistance to water is increased.
Shows high performance even under shock loads between the operating temperatures–20 and 150 °C
APPLICATION PLACES
- Trilubgrease MPC-EP is used in iron-steel, paper, mining, stone quarry, cement industries where high shock loads present in middle and high rpm bearings and moving beds.
- Universal Joint kit
- Water pumps,
- Textile machinery,
- High rpm roller mill beds,
- Generator bearings,
- Wide bearing beds in dry and wet ends of paper machines,
- Worm infinite gear mechanisms.
- Can be used anywhere in need for mineral based, Lithium soap and general grease applications.
P.S.: Should not be mixed with Sodium, Calcium and Barium greases!
BENEFITS
- Extreme Pressure (EP) additives helps the grease to work under heavy shock loads.
- Can be applied by central lubrication system upto NLGI 2 as well as grease gun or brush.
- Resistance against wear and fatigue, enables long service life for bearings.
- Excellent protection from corrosion and oxidation.
- With the support of the Aluminum stearat protects he bearing under conditions with water and prevents leakage.
- Protects bearings against water and provides leak proof.
- By increasing service life of bearings it decreases maintenance costs.
PACKAGES : 1 Kg, 2,5 Kg, 4 Kg, 16 Kg, 180 Kg
PROPERTIES
| Trilubgrease MPC - EP | Standart | 692 - 460 |
| NLGI | DIN 51818 | 1 |
| Color | Yellow | |
| Base Oil | Mineral | |
| Soap Type | Lithium Complex with Aluminium soap | |
| Worked penetration 60 ST, 25 °C | ASTM D 217 | 265 - 295 |
| Density 20 °C , g/cm3 | DIN 51757 | 0,9 |
| Base Oil viscosity, 40 °C mm2/sec | ISO VG | 460 |
| Dropping point, [°C] | DIN ISO 2176 | 240 > |
| Oil seperation amount ( % Weight) t = 30 h, T = 150 °C | FTMS 791 C | Max 3 |
| Shell 4 ball test , Weld load (kg) | ASTM D 2596 | > 315 |
|
Shell 4 ball test. Wear – Scar diameter (mm) 1800 rpm, 60kg, 60 sec, 25 °C.
|
IP 239 | < 0,6 |
| Operating Temperature [°C] | -20 .. 150 | |
| Copper Corrosion, 24 h/100 °C | DIN 51811 | 1 a |
| Speed factor ( nxdm ) | d+D/2 x n | 300.000 |
(*) given values are typical and may vary in production.
Warning: The explanations and technical values in this document are general data which are obtained by research and experience. Our company do not accept any responsibility in case of any damage caused by wrong application of lubricants or wrong lubricant choice. Please consult technical experts for the right choice of lubricant and application.
