Trilubgrease MS–BEP 691-1500
Trilubgrease  MS- BEP 691 -1500 is a high performance black colored grease enhanced by graphite and MoS2  with Lithium soap and high viscosity mineral base oils with wide range of applications at low rpm .
Trilubgrease LX - MSG 69x shows high performance even under  shock, variable vibration loads with water between the operating temperatures –20 and 160 °C.
 
APPLICATION PLACES
In bearings and moving beds with low rpm,
 
  • Automotive, paper, mining, cement, agricultural machinery, construction equipment.
  • Conveyor beds with moving bands
  • Crane mechanisms
  • Taret lubrication
  • Automobile and railway vehicle axle bearings.
 
P.S.: Should not be mixed with Sodium, Calcium and Barium greases!
 
BENEFITS
  • Thanks to Molybdenum Sulphide Composition shows high performance and provides dry lubrication.
  • Damps vibration and shock load, decreases friction and wear.
  • Ease of use by grease gun, brush or spatula
  • Protects bearings against water and provides leak proof.
  • Excellent protection from corrosion and oxidation. 
  • By increasing service life of bearings it decreases maintenance costs.
 
PACKAGES : 1 Kg, 16 Kg, 180 Kg

 

PROPERTIES

Trilubgrease MS-BEP Standart 691-1500
NLGI DIN 51818 1
Color    Black
Base Oil    Mineral
Dry Lubricating EP additive MoS2 , ( % Weight )   3
Soap Type    Lithium
Worked penetration 60 ST, 25 °C  ASTM D 217 310-340
Density  20 °C , g/cm3 DIN 51757 0,91
Base Oil viscosity, 40 °C  mm2/sec  ISO VG 460 - 680 1500-1600
Soap Amount [ % Weight ]    6-9
Dropping point, [°C] DIN ISO 2176 180 Min.
Alkality:  mg KOH / mg   1 Max.
Oil seperation amount [ % Weight ] , 40 °C , 42 h    IP 121 5, 0 Max
Copper Corrosion, 24 h/100 °C ASTM D2509-68 12
Shell 4 ball test , Weld load (kg) ASTM D 2596 > 500
Shell 4 ball test. Wear – Scar diameter (mm) 1800 rpm, 60kg,  60 sec, 25 °C. IP 239 < 0,538
Antioxidant property 100C, 100 hrs. 
Reduction in pressure(kg/cm3)
  0,25
Copper Corrosion, 24 h/100 °C DIN 51811 Max. 1 b
Speed factor ( nxdm ) d+D/2 x n 50.000

 

(*) verilen değerler tipiktir ve üretimden üretime farklılık gösterebilir.
 
Önemli Uyarı : Bu dökümanda verilmiş olan açıklama ve teknik değerler, firmamızın tecrübe ve araştırmalar sonucunda elde etmiş olduğu genel bilgilerdir. Buradaki bilgilerin yanlış kullanım veya yağ seçiminden doğabilecek zararlardan firmamız sorumluluk kabul etmez. Lütfen işletme koşul ve uygulamalarınıza uygun yağ seçimi yapmak için firma Teknik Yetkililerine danışınız.