Trilub BORSOL 9–25 WS
Trilub BORSOL 9-25 WS is a semi-synthetic metal working fluid making a translucent micro emulsion with water. Because its viscosity and mineral oil content is higher than that of BORSOL 9-15, it can be used for chip removal processes, grinding, cutting of ferrous metals even under heavy conditions.
APPLICATION PLACES
Cutting, milling, grinding, processing high alloy steel, broaching and threading operations.
BENEFITS
- Easily mixed with water and makes a translucent micro emulsion.
- The emulsion is stable regarding bacteriological growth and impurities.
- Keeps the machines clean with good detergant and washing properties.
- The workpiece can be observed optically during grinding process owing to the translucent appearance of the fluid.
- Obtaining very clean surface during grinding operation with very good washing properties.
- High oxidation resistance and thus long service life.
- Corrosion inhibition properties through anticorrosion additives.
- Keeps the microbial growth at minimum level.
- Through high pressure additives, provides longer life for cutting tool edge.
- The product is not skin irritating.
PACKAGES : 20 L, 200 L
PROPERTIES
| Trilub BORSOL | 9–25 WS |
| Base Oil | Mineral |
| Color - appearance | yellow - clear |
| Kinematic viscosity, ( 40 °C ) mm2/s , DIN51562/1 | 80-90 |
| Density ( 20 °C ) gr/ml , DIN 51575 | 1,019 |
| Corrosion resistance, DIN ISO11659-1 | No rusting |
| Refractive index ( 20 °C ), DIN 51423-2 | 1,426 |
| Refractometric coefficient (average refractive index of 3-5-7-8-10 % product-distilled water mixture) | 1,34 |
| pH value ( DIN EN 1262 ) | 10,02 |
| Initial appearance of emulsion ( % 5-540 ppm ) | translucent |
| Appearance of emulsion after 24 hours ( % 5-540 ppm ) | translucent |
| Initial appearance of emulsion ( % 5-900 ppm ) | translucent |
| Appearance of emulsion after 24 hours ( % 5-900 ppm ) | translucent |
| pH value ( 5 % with distilled water) | 9,52 |
| pH value (10% with distilled water) | 9,46 |
| Foam breakdown ( % 5-540 ppm ) | 20 lt, 10 sn |
(*) given values are typical and may vary in production.
Warning: The explanations and technical values in this document are general data which are obtained by research and experience. Our company do not accept any responsibility in case of any damage caused by wrong application of lubricants or wrong lubricant choice. Please consult technical experts for the right choice of lubricant and application.
